Product · Makita
Makita HR4013C: 40 mm SDS max with AVT and soft start
Note: This page contains affiliate links. If you buy through them we may earn a commission at no extra cost to you. Learn more
The Makita HR4013C is a 240 V SDS max rotary hammer for 40 mm holes in concrete and 105 mm TCT cores, with Makita's AVT anti-vibration system. It combines soft start, variable speed and constant speed under load in a 6.9 kg body. It suits electricians, plumbers and general builders who need SDS max capacity for drilling and breaking without the bulk of the biggest machines.
- Impact energy
- Not stated
- Concrete capacity
- 40 mm
- Power
- 1,100 W
- Modes
- 2 modes
- Weight
- 6.9 kg
In its favour
- The listing gives 40 mm in concrete and up to 105 mm with TCT core bits.
- Soft start, variable speed and constant speed under load are listed, along with a torque limiter.
- Anti-vibration technology and a soft no load function help on long runs.
Good to know
- Impact energy in joules is not stated in the listing.
- Two mode operation gives no rotation only setting.
Our take
Capacity and control
Makita lists a maximum bit diameter of 40 mm, a 40 mm capacity in concrete and up to 105 mm with a TCT core bit. That covers large anchors, cable and pipe penetrations and core holes for ventilation. The 1,100 W motor runs at up to 500 rpm.
Soft start, variable speed control and constant speed under load are listed. Soft start helps the bit settle without skating across the surface, and constant speed keeps progress steady as the bit bites.
AVT and protection
Anti-vibration technology reduces the vibration reaching your hands. A soft no load function is listed, which reduces hammering when the bit is not pressed into the work, cutting wear and noise. A torque limiter slips the drive if a bit jams, and the tool is double insulated.
Two modes
The HR4013C offers two mode operation, which on SDS max typically means rotary hammer and hammer only. There is no rotation only setting, so it is not suited to wood or steel. For breaking, the hammer only mode turns it into a capable chisel hammer for tiles, screed and small sections of concrete.
In the case
Makita includes bit grease, a carry case, a depth stop and a handle. The listed weight of 6.9 kg is moderate for SDS max. Impact energy is not stated in the listing, which makes direct comparison with HiKOKI's joule figures difficult.
Where it fits
The HiKOKI DH45MA has more stated impact energy and capacity but weighs 9.4 kg. The HiKOKI DH40MC lists 7.1 J and 40 mm at a similar weight. The Bosch GBH 6-42 C adds electronic kickback control. The Makita stands out for its combination of AVT, soft start and core capacity.
Verdict
The HR4013C is a sound choice for trades needing a 40 mm SDS max hammer with low vibration and good core drilling capacity. For maximum power, the HiKOKI DH45MA is stronger, and for kickback protection the Bosch GBH 6-42 C is the alternative. Demolition only work suits the Makita HM1213C.
Compared with alternatives in: Best SDS max drills and breakers
Amazon listing title: Makita HR4013C 240 V SDS Max AVT Rotary Hammer in a Carry Case, HR4013C/2