# DeWalt 18V XR drills compared Source: https://drillandbit.co.uk/best/dewalt-18v-xr-drills-compared Publisher: Drill and Bit. Picks are based on what the Amazon listings state, not on hands-on testing. Method: https://drillandbit.co.uk/how-we-pick DeWalt sells many 18 V XR drills with similar names, and the model code tells you a lot. The three digit number is the tool, while the suffix says what is in the box: N or NT is a bare unit (T means a TSTAK case), P2 means two 5 Ah batteries and a charger, and K means a kit case. This guide lines up the XR drills currently listed so you can see what each step buys in torque, gears and features. Older models such as the DCD778, DCD796 and DCD999 were not available as UK listings that met our checks, so we compare the current alternatives instead. All of these run on the same DeWalt 18 V XR batteries, so a bare unit makes sense if you already own packs. Follow the manual, wear eye protection and use the side handle where one is supplied. ## Products ### 1. DeWALT | DCD996P2 XR Brushless Combi Drill | 18V 2 x 5.0Ah Li-Ion Max torque: 95 Nm; Batteries in box: 2 x 5.0 Ah; Charger: Multi-voltage XR charger; Chuck: 12.7 mm; Speeds: 3 A full size 18 V XR brushless combi drill with two 5 Ah batteries, a multi-voltage charger, side handle and TSTAK case. It suits trades and keen DIYers who want one drill for most jobs. In its favour: - The listing states 95 Nm of torque, enough headroom for large augers, hole saws and long screws in timber. - Three mechanical speeds give a slow gear for driving and a fast one for small bits in metal and masonry. - Two 5.0 Ah packs with charge indicators and a TSTAK case are in the box, so nothing extra is needed to start. Good to know: - The listing gives a weight of 1 kg, which looks like the bare body only; expect a heavier tool with a 5 Ah pack fitted. - Chuck size is listed as 12.7 mm and the bullet points are very short, so check the full DeWalt spec sheet. ### 2. DEWALT 18V XR Brushless Hammer Drill Driver, Tool only in TSTAK Box, DCD805NT-XJ Type: 18 V hammer drill driver; Max torque: 90 Nm; Weight: Not stated; In the box: Tool, belt hook, bit holder, TSTAK box (no battery) A compact DeWalt 18 V XR brushless hammer drill driver supplied as a bare unit in a TSTAK box. Strong for its size and ideal if you already run XR batteries. In its favour: - 90 Nm from an ultra compact body, according to the listing, is the strongest figure in this guide. - 15 torque settings, a two speed all-metal gearbox and a three mode pivoting LED are listed. - Fits all DeWalt 18 V XR batteries and chargers, so existing owners pay only for the tool. Good to know: - Bare unit: no battery or charger is included, so first time buyers must add both. - The listing does not give the weight with a battery fitted. ### 3. DeWALT | DCK276P2 Brushless Twin Pack | 18V 2 x 5.0Ah Li-Ion | DCK276P2-GB Drill: DCD996 brushless combi; Impact tool: DCF887 brushless impact driver; Batteries: 2 x 5.0 Ah; Charger: DCB105 multi-voltage; Case: TOUGHSYSTEM DS150 DeWalt's popular XR brushless twin pack with the three speed DCD996 combi drill, DCF887 impact driver, two 5 Ah packs, charger and TOUGHSYSTEM box. In its favour: - The DCD996 drill is listed at 95 Nm, enough for large augers and hole saws. - Two 5.0 Ah batteries and a multi-voltage XR charger are included. - Comes in a TOUGHSYSTEM DS150 box that stacks with DeWalt storage. Good to know: - The listing does not give the impact driver's torque or speeds. - The boxed kit weighs 7.66 kg according to the listing, so it is bulky to carry. ### 4. DEWALT DCD800NT-XJ 18V XR Brushless Hammer Drill Driver - Bare Unit Type: Hammer drill driver; Max torque: 90 Nm; Speeds: 2; Supplied as: Bare unit (no battery) The DCD800 is DeWalt's mid size brushless XR hammer drill driver, here as a bare unit. 90 Nm, two gears and a pivoting LED make it a strong all rounder. In its favour: - 90 Nm of listed torque handles large holes and long screws. - 15 position torque control and a three mode foot LED with pivot are listed. - Steel belt hook and magnetic bit holder come with the tool. Good to know: - Bare unit, so you need DeWalt 18 V batteries and a charger. - The listing weight of 1.6 kg excludes the battery. ### 5. DEWALT 18V XR Multi-Head Drill Driver, 4 Heads, DCD803KN-XJ - Power Source Type - Style Type: Multi-head drill driver; Max torque: 73 Nm; Speeds: 2; Supplied as: Bare unit with 4 heads The DCD803 is a compact XR brushless drill driver with four quick change heads: chuck, bit holder, offset and right angle. Sold as a bare unit with an organiser. In its favour: - Four heads, including right angle and offset drivers, reach screws a normal drill cannot. - 73 Nm and a two speed all-metal transmission are listed. - Flexible attachment organiser keeps the heads together. Good to know: - No hammer mode, so it is not for brick or block. - Bare unit with no battery or charger, so add XR packs if you are new. ### 6. DEWALT 18V XR Brushless Compact Hammer Drill Driver with 2 5Ah Lithium-Ion Batteries and TSTAK Kitbox, UK Plug, DCD799P2T-GB Voltage: 18 V; Max torque: 74 Nm; Weight: Not stated; Batteries in box: 2 x 5.0 Ah DeWalt's compact XR brushless hammer drill driver with two large 5 Ah batteries, charger and TSTAK box. More drill than most homes need, but it will not run short. In its favour: - 74 Nm and two gears handle large holes in timber as well as everyday fixings. - 15 torque settings and an LED work light are listed. - Two 5 Ah XR packs and a UK plug charger are included. Good to know: - The 5 Ah packs add weight compared with 2 Ah kits, and the drill's own weight is not stated. - More capacity than a typical home user needs, which shows in what you pay. As an Amazon Associate we earn from qualifying purchases.