# Best impact driver kits and bare tools

Source: https://drillandbit.co.uk/best/best-impact-driver-kits
Publisher: Drill and Bit. Picks are based on what the Amazon listings state, not on hands-on testing. Method: https://drillandbit.co.uk/how-we-pick

An impact driver drives long screws, decking screws and coach bolts with far less effort and wrist strain than a drill, because its hammer mechanism adds rotational blows once the screw starts to resist. The best ones also give you control on small screws, through speed modes or a quieter hydraulic or oil pulse mechanism. This guide compares 18 V and 12 V impact drivers by the torque, speed and length each listing states, and it is clear about what you get: some are kits with batteries, some are bare tools for people already on a platform. If you are starting from nothing, a twin pack with a drill is often the better buy. Use impact rated bits, keep your hand away from the bit, wear eye protection and follow the manual and HSE guidance.

## Products

### 1. DeWALT | DCK276P2 Brushless Twin Pack | 18V 2 x 5.0Ah Li-Ion | DCK276P2-GB

Drill: DCD996 brushless combi; Impact tool: DCF887 brushless impact driver; Batteries: 2 x 5.0 Ah; Charger: DCB105 multi-voltage; Case: TOUGHSYSTEM DS150

DeWalt's popular XR brushless twin pack with the three speed DCD996 combi drill, DCF887 impact driver, two 5 Ah packs, charger and TOUGHSYSTEM box.

In its favour:
- The DCD996 drill is listed at 95 Nm, enough for large augers and hole saws.
- Two 5.0 Ah batteries and a multi-voltage XR charger are included.
- Comes in a TOUGHSYSTEM DS150 box that stacks with DeWalt storage.

Good to know:
- The listing does not give the impact driver's torque or speeds.
- The boxed kit weighs 7.66 kg according to the listing, so it is bulky to carry.

### 2. Milwaukee M18FID2 18v M18 Fuel Impact Driver with 2 x 5Ah Batteries

Max torque: 226 Nm; Max speed: 3,600 rpm; Length: 116 mm; In the box: Driver and 2 x 5.0 Ah batteries

Milwaukee's M18 Fuel impact driver with 226 Nm, listed with two 5 Ah batteries. Short and very strong, it suits decking, framing and trade fixing.

In its favour:
- 226 Nm is the highest torque listed in this guide, for long screws and coach bolts.
- At 116 mm long, the listing describes it as the most compact in its class.
- Two 5.0 Ah batteries give long runtime between charges.

Good to know:
- A charger is not listed in the contents, so check whether you need to buy one.
- So much torque can snap small screws; use the lowest setting for light work.

### 3. Bosch Professional 18V System Cordless Impact Driver GDR 18V-215 (incl. L-BOXX)

Max torque: 215 Nm; Max speed: 3,300 rpm; Length: Not stated; In the box: Driver, belt clip, L-BOXX (no battery)

Bosch Professional's 18 V impact driver with 215 Nm and two auto driving modes, supplied in an L-BOXX without battery. Strong and controllable for trade and DIY.

In its favour:
- 215 Nm and 3,300 rpm handle long screws and hardwood, according to Bosch.
- Two Auto Driving Modes with automatic shut down and slow down help avoid over driven screws.
- Fits the Bosch 18 V system and AMPShare batteries.

Good to know:
- No battery or charger is included in this listing.
- The listing does not give the head length, so check fit in tight spaces.

### 4. DEWALT DCF870N-XJ 18V XR Brushless Hydraulic Impact Driver, Bare Unit, [Power Source Type], [Style], [Color] - Style - Color

Max torque: 56 Nm; Max speed: 4,000 rpm; Length: 101 mm; In the box: Tool only (no battery)

A DeWalt 18 V XR hydraulic impact driver, only 101 mm long, sold as a bare unit. Quieter impacts and fine control suit indoor fitting and cabinet work.

In its favour:
- The hydraulic mechanism reduces impact noise, according to DeWalt.
- 101 mm long, so it reaches into small spaces.
- Drop and load bit holder for one handed bit changes, plus a flashlight mode.

Good to know:
- Listed torque of 56 Nm is far below standard impact drivers, so it is not for big coach bolts.
- Bare unit: battery and charger are sold separately.

### 5. Bosch Professional 12V System Set: Cordless Combi Drill GSB 12V-15 + Impact Driver GDR 12V-105 (incl. 2X 2.0Ah Battery + Charger GAL 12V-40, Bag)

Drill: GSB 12V-15 combi drill; Impact tool: GDR 12V-105 impact driver; Batteries: 2 x 2.0 Ah; Charger: GAL 12V-40; Case: Bag

Bosch Professional's light 12 V twin pack with a combi drill, an impact driver, two 2 Ah batteries and a charger in a bag. Good for home and installer work.

In its favour:
- Both tools together weigh 2.5 kg according to the listing, so they are easy to carry.
- The combi drill has a hammer mode for small plug holes in masonry.
- Two batteries and a GAL 12V-40 charger are included.

Good to know:
- 12 V tools are slower than 18 V on decking and long coach screws.
- Torque for each tool is not stated separately in the listing.

### 6. HiKOKI WHP18DAW2Z 18V Brushless & Silent Impact Driver, Body Only

Max torque: 33 Nm; Max speed: Not stated; Length: 128 mm head; In the box: Tool in Stackable System Case 2 (no battery)

HiKOKI's brushless 18 V oil pulse impact driver, described as the quietest in its class, sold body only in a system case. Good for indoor and occupied homes.

In its favour:
- Oil Pulse technology for the lowest noise level in its class, according to HiKOKI.
- Compact 128 mm head and an adjustable three LED light are listed.
- IP56 rating and variable speed trigger, per the listing highlights.

Good to know:
- 33 Nm listed is low, so heavy coach bolts are outside its job.
- Body only and one of the dearer tools here for its torque.

As an Amazon Associate we earn from qualifying purchases.